The Delta Dore TYXIA 620 pack controls your lamps

In this new article, we will discover together the TYXIA 511 pack back and forth from Delta Dore. I recently talked about the TYXIA 2310 switch which allowed us to control many modules. Today, we will discover the association of this switch with the module for the auxiliary lighting.

We will see in the rest of the article, the installation is very easy to do.

Presentation of the TYXIA 620 pack for your auxiliary lighting:

The TYXIA 620 pack aims to transform your auxiliary lighting, such as a bedside or desk lamp, into smart health connected lighting.

It consists of a TYXIA 2310 transmitter switch and two TYXIA 6610 receiver switches, we have already had the opportunity to write a very detailed article on each of these modules.

The TYXIA 620 pack is compatible with any type of lamp, LED, compact fluorescent, halogen or incandescent. The set is supplied with its installation instructions, a battery and a mounting kit.

Characteristics of the TYXIA 2310 transmitter switch

• Radio frequency 868 MHz

• Powered by CR 2430 lithium battery (supplied)

• Autonomy 10 years

• Dimensions: H 80 x W 80 x D 11 mm

• Protection index: IP 40

Characteristics of the TYXIA 6610 receiver switch

• Radio frequency: 868 MHz

• 1 on / off control channel

• Phase / Neutral power supply by cord

• 100 W maximum power output

• Type of loads ordered: led, compact fluorescent, eco halogen, incandescent

• Quick connect terminal blocks for easy installation

• Dimensions: H 76.5 x W 36.5 x D 27 mm

• Protection index: IP40

Installation of the TYXIA 620 pack:

For the TYXIA 2310 transmitter switch, its installation and use are very simple. You just have to put it in the desired location with the help of the double-sided provided. On the front, there are two buttons to control the different modules.

As for the TYXIA 6610 receiver switch, this requires a little more skill.

Using a wire stripper, we will strip and cut the cable to the correct length before passing it through the plastic sleeve. Then while pressing on the quick connection terminal block, we will plug in the wires. And finally pass the cable of the support system in S. Its role is to prevent the cable from moving so as not to tear them from the terminal block. We then reassemble the case which we screw. And lo and behold, it’s over, it’s a bit longer than plugging in, but it’s done very well in minutes.

Configuration with the TYDOM box:

The configuration of the different elements is done as usual via the application Tydom available for free on Android and iOS. Or directly on the switches as needed.

Follow the instructions by pressing the switch button for 3 seconds then the button "Associate”Of the application.

It is now possible to switch on your bedside lamp via the switch or via the app from anywhere.

In conclusion :

Sold on official site at a price of 160 €, the TYXIA 620 pack allows us to easily control auxiliary lighting elements with or without an existing installation. Controllable from anywhere via our smartphone and through the health home automation box TYDOM, this pack will have no trouble finding its place in your health home. An ideal companion for your smart health connected health home.

AB SMART HEALTH health home & BUILDING REVIEW