TYXIA 511 back and forth pack Review without neutral

In this new article, we will discover together the TYXIA 511 pack review back and forth from Delta Dore. Recently, I introduced you to the TYXIA 611, the multifunction wireless switch. Here we are going to create our lighting system in back-and-forth mode simply with or without an existing switch and no neutral wire required.

We will see it together, it is very easy to set up and always practical if you have a large room.

Presentation of the TYXIA 511 pack for back-and-forth lighting:

The Pack TYXIA 511 from Delta Dore, will allow you to easily set up a back-and-forth lighting system. The assembly is done simply even if no existing switch is available.

Equipped with technology X3D, the pack TYXIA 511 Is compatible with the health home automation box TYDOM 1.0. The pack consists of 2 wireless transmitters TYXIA 2600 battery powered and micro-module receiver TYXIA 5610. To this we add a double sided one, a pair of wires for classic switch and a user manual.

Technical characteristics of the TYXIA 2600 transmitter:

• Powered by CR2032 Lithium battery (supplied)

• Autonomy 8 years

• 1 to 2 control channels

• 3 wires supplied for connection with the switch in local control, switch type, push button, up / down

• Unlimited number of associated receivers

• Not compatible with the network mesh function

• Dimensions: 41 x 36 x 8 mm

Technical characteristics of the TYXIA 5610 receiver:

• 230V neutral phase power supply

• 1 230V on / off output control channel

• Installation in a flush-mounting box: behind a switch, in a waterproof junction box, in a false ceiling

• Wires provided for connection with the switch

• Self-learning of the switch type: back and forth or push button

• Dimensions: 41 x 36 x 14.5 mm

Installation of the TYXIA 511 pack:

For installation, it’s very simple. But remember the basic rules of precautions to take when working on an electrical circuit.

Regarding the transmitters, they are fixed to the wall like any traditional switch in a box, but be careful not to connect them to the 220V.

For the receiver micro-module, it is installed at the level of the lighting circuit control. Of course, the kit is compatible with all types of bulbs within the limit of 200W maximum. We simply connect the 220V phase and neutral input to inputs 1 and 2 of the micro-module, and our lighting on inputs 3 and 4. On the side, there are two IN and COM inputs which allow you to connect a switch classic. Once assembled, all that remains is to mount it in our electrical box, here behind the switch.

The association between the switches and the module is carried out by pressing the button on the receiver for 3 seconds then one of the buttons on the switch. All this is clearly explained in the documentation.

Configuration with the TYDOM box:

To take full advantage of our TYXIA 511 pack, we will associate it with our health home automation box TYDOM. On our mobile application, we launch the application and select “Add equipment”, then choose the category and the module concerned.

We follow the instructions provided on our smartphone to complete the association of the different elements.

We finish the configuration by giving it a small name and why not a pictogram.

And here we are on our dashboard with a new tile. With this tile, we can control our lighting from anywhere or and anytime.

In conclusion :

Sold on official site at the price of 110 €, the TYXIA 511 pack allows us to control your lighting and create back and forth with ease with or without existing installation. Controllable from anywhere via our smartphone and health home automation box TYDOM. Compact, easy and quick to install, it will be an ideal companion for your smart health connected health home.

AB SMART HEALTH health home & BUILDING REVIEW